LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> High Mounted Stop Lamp Replacement (Utility - ENDGATE Window) >> Removal Procedure

Removal Procedure

  1. Remove the screws that retain the high mount stoplamp to the endgate window.
  2. Remove the high mount stoplamp from the vehicle.
  3. Pull the rubber grommet from the body at the top of the endgate opening in order to remove the electrical connector.

    Pull the electrical connector through the hole in the body and disconnect.

    Fig 1: Locating High Mount Stop Lamp Components (Utility - Endgate Window)
    G01842805Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals