Removal Procedure

On utility vehicles, 2 different lamps are used. One type of dome lamp is incorporated into the overhead console while the other is mounted separately on the headliner.

1. Remove the lamp lens assembly using a small screw driver.
   Fig 1: Removing Lamp Lens Assembly

   Courtesy of GENERAL MOTORS CORP.
2. Remove the dome lamp assembly from the headliner.
   Fig 2: Removing/Installing Dome Lamp Assembly

   Courtesy of GENERAL MOTORS CORP.
3. Disconnect the electrical connector.
4. Remove the bulb.
   Fig 3: Locating Electrical Connector

   Courtesy of GENERAL MOTORS CORP.