LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. Refer to ENGINE COVER REPLACEMENT in Interior Trim.
  2. Remove the oil level indicator.
  3. Remove the bolt holding the oil level indicator tube to the transmission fluid fill tube.
    Fig 1: Removing Bolt Holding Oil Level Indicator Tube To Transmission Fluid Fill Tube
    G01643728Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper half of the oil level indicator tube from the lower half.
    Fig 2: Removing Upper Half Of Oil Level Indicator Tube From Lower Half
    G01643729Courtesy of GENERAL MOTORS CORP.
  5. Clean the old sealer from the tube.
  6. Remove the oil level indicator tube bolt.
  7. Remove the oil level indicator tube from the engine using a twisting motion.
    Fig 3: Removing Oil Level Indicator Tube Bolt And Oil Level Indicator Tube From Engine
    G01643730Courtesy of GENERAL MOTORS CORP.
  8. Clean the old sealer from the oil level indicator tube and the engine block.
scientia non olet · About LEMON Manuals