LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Drive Belt Tensioner
G01643604Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt tensioner assembly.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the attaching bolt.

    Tighten 

    Tighten the tensioner assembly bolt to 50 N.m (37 lb ft).

  3. Install the drive belt. Refer to DRIVE BELT REPLACEMENT  .
scientia non olet · About LEMON Manuals