LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the exterior of the crankshaft front oil seal with clean engine oil.
  2. Use the J 35468  with a hammer in order to install the crankshaft front oil seal.
  3. Inspect to ensure the crankshaft front oil seal is flush and square to the engine front cover.
  4. Install the crankshaft balancer. Refer to CRANKSHAFT BALANCER REPLACEMENT  .
    Fig 1: Installing Crankshaft Front Oil Seal
    G01643702Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals