LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Engine Mechanical - 4.3L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent, around the oil level indicator tube 13 mm (0.5 in) below the tube bead.
  2. Install the oil level indicator tube into the engine block. Rotate the oil level indicator tube into position.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the oil level indicator tube bolt.
    Fig 1: Installing Oil Level Indicator Tube Bolt
    G01644143Courtesy of GENERAL MOTORS CORP.

    Tighten 

    Tighten the oil level indicator tube bolt to 12 N.m (106 lb in).

  4. Install the oil level indicator into the oil level indicator tube, if required.
    Fig 2: Installing Oil Level Indicator Into Oil Level Indicator Tube
    G01644144Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals