Intake Manifold Cleaning and Inspection

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to SAFETY GLASSES CAUTION in Caution and Notices.

Clean the upper intake manifold in cleaning solvent.

Fig 1: Cleaning Upper Intake Manifold
Courtesy of GENERAL MOTORS CORP.
Dry the upper intake manifold with compressed air.
Clean the lower intake manifold in cleaning solvent.

Fig 2: Cleaning Lower Intake Manifold
Courtesy of GENERAL MOTORS CORP.
Dry the lower intake manifold with compressed air.
Inspect the upper intake manifold for the following:
- Cracks or other damage to the exterior (1)
- Cracking or damage in the gasket grooves (2) and (3)
- Damage to the throttle body mounting surface (4)
- Loose or damaged bolt hole thread inserts (5)
Fig 3: Inspecting Upper Intake Manifold
Courtesy of GENERAL MOTORS CORP.
Inspect the lower intake manifold for the following:
- Damage to the gasket sealing surfaces (1) and (2)
- Restricted cooling system passages (3)
- Cracks or damage
- Damage to the threaded bolt holes
Fig 4: Inspecting Lower Intake Manifold
Courtesy of GENERAL MOTORS CORP.