LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 828 (Seat Belt System) >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover for the front seat shoulder belt to expose the bolt.
  2. Remove the front seat shoulder belt retaining bolt from the guide adjuster bracket.
  3. Remove the left front side door lock pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT -- LF LOCK PILLAR in Interior Trim.
  4. Remove the right front side door lock pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT -- RF LOCK PILLAR in Interior Trim.
  5. Remove the 2 guide adjuster bracket retaining bolts from the pillar.
  6. Remove the guide adjuster bracket from the pillar.
    Fig 1: Shoulder Belt Guide Adjuster (Front)
    G01567510Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals