LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 828 (Seat Belt System) >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the guide adjuster bracket to the pillar.
    Fig 1: Shoulder Belt Guide Adjuster (Front)
    G01567511Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 2 guide adjuster bracket retaining bolts to the pillar.

    Tighten 

    Tighten the guide adjuster bracket retaining bolts to the pillar to 20 N.m (15 lb ft).

  3. Install the left front side door lock pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT -- LF LOCK PILLAR in Interior Trim.
  4. Install the right front side door lock pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT -- RF LOCK PILLAR in Interior Trim.
  5. Install the shoulder belt retaining bolt to the guide adjuster bracket.

    Tighten 

    Tighten the front seat shoulder belt retaining bolt to the guide adjuster bracket to 53 N.m (39 lb ft).

  6. Install the cover for the front seat shoulder belt.
scientia non olet · About LEMON Manuals