LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 826 (Power Steering System) >> Repair Instructions >> Steering Gear Thrust Support Replacement - Off Vehicle (700 Gear) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the stub shaft back and forth in order to drain the power steering fluid.
  2. Remove the coupling shield retainer and the lock nut from the steering gear housing using J 43435  and a torque wrench.
    Fig 1: Removing Coupling Shield Retainer & Lock Nut From Steering Gear Housing
    G01645959Courtesy of GENERAL MOTORS CORP.
  3. Remove the adjuster nut assembly (2) from the steering gear housing (1) using J 42882. 
    Fig 2: Removing Adjuster Nut Assembly From Steering Gear Housing
    G01645960Courtesy of GENERAL MOTORS CORP.
  4. Remove the thrust support assembly (2) from the steering gear housing (1).
  5. Remove the O-ring seal (3) from the thrust support assembly (2).
    Fig 3: Removing O-Ring Seal From Thrust Support Assembly
    G01645961Courtesy of GENERAL MOTORS CORP.