LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 826 (Power Steering System) >> Repair Instructions >> Power Brake Booster Inlet Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Disconnect the hydraulic brake booster inlet hose from the of the power steering pump.
    Fig 1: Disconnecting Hydraulic Brake Booster Inlet Hose
    G01645892Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
  4. Disconnect the hydraulic brake booster inlet hose from the hydraulic brake booster.
  5. Remove the hydraulic brake booster inlet hose from vehicle.
    Fig 2: Removing Hydraulic Brake Booster Inlet Hose From Vehicle
    G01645893Courtesy of GENERAL MOTORS CORP.