LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Rear End) >> Repair Instructions >> Window Garnish Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the swing-out window latch. Refer to WINDOW REPLACEMENT - SWING OUT in Stationary Windows.
  2. Remove the screws that retain the right molding on the sides and the bottom.
    Fig 1: Removing Screws From Molding On Sides And Bottom
    G01567302Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws that retain the left molding on the sides and the bottom.
  4. Remove the molding from the door in the area of the retainers.

    There are 2 retainers on top, one in the center of the panel, and 6 around the outside edge.

    Fig 2: Removing Screws From Left Door Molding
    G01567303Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals