LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Rear End) >> Repair Instructions >> Weatherstrip Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the door.
  2. Remove the fourth pillar trim. Refer to INTERIOR TRIM and INTERIOR TRIM in Interior Trim.
  3. Remove the rear upper garnish molding. Refer to GARNISH MOLDING REPLACEMENT - REAR UPPER in Interior Trim.
  4. Remove the body side trim panel. Refer to INTERIOR TRIM and INTERIOR TRIM in Interior Trim.
    Fig 1: Removing Lift Gate Weatherstrip
    G01567400Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear trim plate. Refer to CARPET RETAINER REPLACEMENT in Interior Trim.
  6. Pull the weatherstrip from the pinch-weld flange. Start at the upper right corner.