LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Rear End) >> Repair Instructions >> Strut Ball Stud Replacement - Lift Gate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the strut ball to lid or body by turning clockwise into the weldnut.

    Tighten 

    Tighten the strut ball to 25 N.m (18 lb ft).

  2. Install the strut. Refer to STRUT REPLACEMENT - LIFT GATE .
  3. Install the support. Close liftgate.
    Fig 1: Installing Lift Gate Strut Ball Stud
    G01567337Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals