LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Rear End) >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the appropriate drill bit in order to drill the head from the rivet (2).
  2. Remove the rivets (2).
  3. Remove the roof drip molding (1).
    Fig 1: Removing Roof Drip Molding - Rear
    G01567398Courtesy of GENERAL MOTORS CORP.