LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Rear End) >> Repair Instructions >> Garnish Molding Replacement - Lift Gate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the garnish molding (2).

    Install the locator pins into the locator hole on the liftgate.

    NOTE: Refer to FASTENER NOTICE in Caution and Notices.
  2. Install the garnish molding screws (3).

    Tighten 

    Tighten the garnish molding screws to 2 N.m (18 lb in).

  3. Install the handle escutcheon (9) and the handle (10).
  4. Install the interior handle.

    Tighten 

    Tighten the interior handle screws to 6 N.m (53 lb in).

  5. Install the interior handle screw covers (12).
    Fig 1: Installing Lift Gate Garnish Molding
    G01567397Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals