LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - LF Lock Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the retaining screw from the garnish molding.
  2. Remove the driver's side seat belt upper mounting bolt. Refer SEAT BELT SYSTEM in Seat Belts.
  3. Pull back on the garnish molding in order to release the fasteners.
  4. Remove the garnish molding from the pillar.
    Fig 1: Removing Garnish Molding - LF Lock Pillar
    G01567247Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals