LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Seat System) >> Repair Instructions >> Seat Riser Trim Cover Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws from the seat riser trim cover.
  2. Remove the seat bolts from the seat to riser.
  3. Remove the side trim covers from the seat riser.
  4. Remove the screws that retain the power seat trim plate to the cover.
  5. Disconnect the power seat switch electrical connector.
  6. Remove the power seat switch from the trim plate by snapping the switch out.
    Fig 1: Removing Screws Retaining Power Seat Trim Plate To Cover
    G01567112Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals