LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front (YC7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bucket seat from the riser. Refer to SEAT REPLACEMENT - BUCKET  .
  2. Remove the armrest from the recliner side of the seat. Refer to ARMREST REPLACEMENT (YC6)  or ARMREST REPLACEMENT (YC7)  .
  3. Remove the J-hooks that retain the carpet on the back of the seat cushion to the corners of the seat cushion trim cover.
  4. Remove the screw that retains the seat back recliner handle to the recliner.

    Important:  When removing the bolts that retain the seat back recliner, note the position and length of the bolts. This will assist with reassembly.

    Fig 1: Removing Bolts Retaining Recliner To Seat Back And Seat Cushion Frames (YC7)
    G01567084Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts that retain the recliner to the seat back and seat cushion frames.

    Important:  Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage the seat back hinge or the lumbar support cable.

  6. Remove the seat back recliner from the seat frame.
scientia non olet · About LEMON Manuals