LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Front (YC7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back hinges to the seat frame.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts that retain the seat back hinges to the seat back frame and to the seat cushion frame.

    Tighten 

    Tighten the bolts that retain the seat back hinges to the seat back frame and the seat cushion frame to 30 N.m (22 lb ft).

  3. Install the bolts in the locations noted during disassembly.
  4. Install seat cover and pad. Refer to SEAT BACK COVER AND PAD REPLACEMENT (YC5 AND YC6)  or SEAT BACK COVER AND PAD REPLACEMENT (YC7)  .
  5. Install the J-hooks that retain the carpet to the seat back and to seat cushion frame and to the corners of the seat cushion cover.
  6. Install the armrest. Refer to ARMREST REPLACEMENT (YC6)  or ARMREST REPLACEMENT (YC7)  .
  7. Install the bucket seat to the riser. Refer to SEAT REPLACEMENT - BUCKET  .
    Fig 1: Installing Bolts Retaining Seat Back Hinge To Seat Frame (YC7)
    G01567081Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals