Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the seat back frame.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the right and left seat back frame hinge bolts.
Tighten
Tighten the right and left seat back frame hinge bolts to 30 N.m (22 lb ft).
- Install the rear seat latch release cable. Refer to SEAT BACK LATCH RELEASE CABLE REPLACEMENT - REAR .
- Install the headrest bushing. Refer to BUCKET SEAT HEAD RESTRAINT BUSHING REPLACEMENT
- Install the seat back cover and pad. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR (YC5 AND YC6) or SEAT BACK COVER AND PAD REPLACEMENT - REAR (YC7) .
- Install the bench seat to the vehicle. Refer to SEAT REPLACEMENT - REAR BENCH .