LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bucket seat from the vehicle. Refer to SEAT REPLACEMENT - BUCKET  .
  2. Remove the seat back cover and pad from the seat back frame. Refer to SEAT BACK COVER AND PAD REPLACEMENT (YC5 AND YC6)  or SEAT BACK COVER AND PAD REPLACEMENT (YC7)  .
  3. Disconnect the lumbar plate cable (1) from the lumbar plate.
    Fig 1: Disconnecting Lumbar Plate Cable From Lumbar Plate
    G01567094Courtesy of GENERAL MOTORS CORP.
  4. Pull rearward on the lumbar plate corners to release it from the seat back frame.
    Fig 2: Releasing Lumbar Plate Corners From Seat Back Frame
    G01567095Courtesy of GENERAL MOTORS CORP.
  5. Remove the lumbar plate from the seat back frame.
    Fig 3: Removing Lumbar Plate From Seat Back Frame
    G01567096Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals