Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Place the seat back in the fully-upright position.
- Release the J-hook along the bottom edge of the seat back.
- Reach up inside the seat back. Remove the armrest retaining clip.
- Slide the armrest assembly out of the seat back.
- Remove the armrest cover for cleaning or replacement, if needed:
- 5.1. Unzip the cover.
- 5.2. Slide the cover off the armrest.