Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bucket seat from the vehicle. Refer to SEAT REPLACEMENT - BUCKET .
- Place the seat in the fully upright position.
- Release the J-hook at the bottom of the seat back.
- Reach up and inside the seat back. Remove the armrest retaining clip.
- Slide the armrest assembly out of the seat back.
- Remove the armrest cover for cleaning or replacement:
- 6.1. Unzip the armrest cover.
- 6.2. Pull the armrest cover off of the seat pad.