Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Install the front bumper fascia to the impact bar.

Fig 1: Installing Front Bumper Fascia To The Impact Bar
Courtesy of GENERAL MOTORS CORP.
Install the front bumper fascia to impact bar push-in retainers.

Fig 2: Identifying Front Bumper Fascia To Impact Bar Push-In Retainers
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the front bumper fascia to the fender bolts.
Tighten

Tighten the bolts to 6 N.m (53 lb in).

Fig 3: Installing Front Bumper Fascia To The Fender Bolts
Courtesy of GENERAL MOTORS CORP.
Install the front bumper fascia to the bumper lower brace bolts.
Tighten

Tighten the bolts to 6 N.m (53 lb in).
Install the grille. Refer to GRILLE REPLACEMENT in Exterior Trim.
Lower the vehicle.

Fig 4: Installing Front Bumper Fascia To The Bumper Lower Brace Bolts
Courtesy of GENERAL MOTORS CORP.