Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to GLASS & SHEET METAL HANDLING CAUTION in Cautions and Notices.

Important: The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused and it must be replaced.

Lift up on the loose area of the reveal molding.

Fig 1: Lifting Up Loose Area Of Reveal Molding
Courtesy of GENERAL MOTORS CORP.
Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.
If the reveal molding cannot be reused, refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS .