LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Trim) >> Repair Instructions >> Molding/Nameplate Replacement - Exterior Trim >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Remove the emblem or the molding:

  1. Apply masking tape to the body side border of the emblem or the molding in order to protect the body from scratches. The tape will also aid in aligning the moldings during installation.
  2. Use J 41409  or a 0.8 mm (0.03 in) fishing line in order to cut through the adhesive material.
scientia non olet · About LEMON Manuals