LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Trim) >> Repair Instructions >> Blackout Transfer Replacement - Front Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to TRIM PANEL REPLACEMENT - DOOR .
  2. Remove the door window run channel from the door frame.
    Fig 1: Removing Door Window Run Channel From Door Frame (Front Door)
    G01566715Courtesy of GENERAL MOTORS CORP.
  3. Remove the emblem from the door. Refer to MOLDING/NAMEPLATE REPLACEMENT - EXTERIOR TRIM .

    Important:  Apply the transfers in a clean environment where dust or fibers will not interfere with proper adhesion.

  4. Use a heat gun or other suitable tool in order to heat the transfer.
  5. Slowly peel the transfer from the door.
    Fig 2: Peeling Transfer From Door (Front Door)
    G01566716Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals