LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 811 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Knee Bolster Replacement - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the knee bolster.
    Fig 1: Installing Knee Bolster To Instrument Panel
    G01566497Courtesy of GENERAL MOTORS CORP.
  2. Install the knee bolster to the instrument panel:
    1. 2.1. Align the retainers.
    2. 2.2. Press the panel into place.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screws that retain the bolster to the instrument panel.

    Tighten 

    Tighten the knee bolster screws to 8 N.m (71 lb in).

  4. Install the instrument panel extension. Refer to INSTRUMENT PANEL (I/P) EXTENSION REPLACEMENT .
scientia non olet · About LEMON Manuals