Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
The axle vent assembly is on the right side of the axle carrier.
- Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
- Remove the vent clamp bolt.
- Remove the hose from the axle nipple.
- Remove the vent assembly from the hose.
- Remove the vent hanger clip from the vent hose.
- Remove the hose clamp from the vent hose.