Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Use a neoprene-type replacement vent hose.
- Install the hose clamp to the vent hose.
- Install the vent hanger clip to the vent hose.
- Install the vent assembly to the vent hose.
- Install the vent hose to the axle nipple.
- Install the hose clamp to the axle nipple. Do no kink or twist the hose.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the vent clamp bolt at the vent assembly.
Tighten
Tighten the bolt to 16 N.m (12 lb ft).
- Lower the vehicle.