Removal procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the IP assembly. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT in Instrument Panel, Gages and Console.
- Remove the vacuum hose from the mode actuator.
- Slide the actuator off the mounting bracket in order to remove the actuator.
- Rotate the actuator (2) so that the actuator linkage slips off the post on the mode door linkage.
- Remove the actuator linkage from the mode door linkage.