LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 802 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Suction Screen Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant from the A/C system. Refer to REFRIGERANT RECOVERY AND RECHARGING .
  2. Remove the engine cover. Refer to ENGINE COVER REPLACEMENT in Interior Trim.
  3. Remove the A/C compressor hose assembly bolt.
  4. Separate the A/C compressor hose assembly from the A/C compressor.

    Important:  The suction screens are available in 3 different sizes.

  5. Select the proper size removal tool (1) from J 44551. 
    Fig 1: Selecting Proper Size Removal Tool
    G01645582Courtesy of GENERAL MOTORS CORP.
  6. Remove the suction screen using the J 44551-31  suction screen removal tool.
    1. 6.1. Thread the forcing screw into the suction screen.
    2. 6.2. Tighten the nut on the forcing screw to remove the suction screen.