LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 802 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Heater Hose Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner. Refer to AIR CLEANER ASSEMBLY in Removal & Installation.
  2. Drain the engine coolant. Refer toDRAINING AND FILLING COOLING SYSTEM in Engine Cooling.
  3. Remove the coolant recovery reservoir. Refer to COOLANT RECOVERY RESERVOIR REPLACEMENT in Engine Cooling.
  4. Remove the heater hose support clamp bolt (5).
  5. Using the J 38185,  reposition the inlet heater hose clamp from the heater core.
  6. Remove the inlet heater hose (2) from the heater core.
  7. Using the J 38185,  reposition the inlet heater hose clamp from the water valve.
  8. Remove the inlet heater hose (2) from the water bypass valve.
    9. Fig 1: Removing Inlet Heater Hose
    G01645601Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals