Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Recover the refrigerant from the system. Refer to REFRIGERANT RECOVERY AND RECHARGING .
- Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
- Remove the auxiliary evaporator front inlet tube from the evaporator inlet tube (2) at the accumulator.
- Remove the O-ring seal.
- Remove the bolts (3) that retain the clips on the auxiliary evaporator front inlet tube (2) to the body.
- Remove the auxiliary evaporator front inlet tube (2) from the vehicle.