Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor resistor assembly.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the screws to the blower motor resistor assembly.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Connect the electrical connectors.
- Install the windshield washers and the coolant reservoir. Refer to COOLANT RECOVERY RESERVOIR REPLACEMENT in Engine Cooling.
- Install the air cleaner. Refer to AIR CLEANER ASSEMBLY in Removal & Installation.