LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Engine Cooling System) >> Repair Instructions >> Engine Oil Cooler Pipe/Hose Quick Connect Fitting >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a bent-tip screwdriver or equivalent, pull on one of the open ends of the retaining ring in order to rotate the retaining ring.
  2. Rotate the retaining ring around the quick connector until the retaining ring is out of position and can be completely removed.

    Discard the retaining rings.

    Fig 1: Removing Quick Connect Fitting Retaining Rings
    G01646412Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine oil cooler line from the quick connector fitting at the radiator.

    Pull the lines straight out from the connectors.

  4. Clean all of the components in a suitable solvent, and dry them with compressed air.
  5. Inspect the fittings, the connectors, the cooler lines, and the cooler for damage, distortion, or restriction. Replace parts as necessary.
    Fig 2: Removing Engine Oil Cooler Line From Quick Connector Fitting
    G01646413Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals