Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the headlamp switch.
- Open the rear doors.
- Remove the screws that retain the tail lamp to the body.
- Remove the lamp sockets from the back of the tail lamp by using the following
- Squeeze the tang at the electrical connector.
- Turn the bulb and the base.
Important: Do not remove the grease from the socket.
- Remove the bulbs from the sockets.