LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Lighting Systems) >> Repair Instructions >> Tail Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a light coating of lithium grease to the sockets if there is no grease in the sockets.
  2. Install the bulbs into the sockets.
  3. Install the lamp sockets to the back of the tail lamp.
  4. Install the tail lamp to the body.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the screws to retain the tail lamp to the body.

    Tighten 

    Tighten the tail lamp screws to 3 N.m (27 lb in).

    Fig 1: Installing Tail Lamp
    G01566244Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals