Parking Brake Cable (Left Rear): Installation
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install cable. Take care to correctly route the cable through the guide and bracket.
- Install cable to the lever.
- Install cable to the backing plate by pressing the cable into place until locking tabs snap into place.
- Install cable at the shock absorber bracket and install bolt. Tighten bolt.
- Install cable to the mounting bracket until the locking tabs snap into place.
- Connect cable end to the equalizer.
- Remove safety stands and lower vehicle.
- Adjust parking brake. See PARKING BRAKE under ADJUSTMENTS.