LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Disc Brakes) >> Removal & Installation >> Disc Brake Caliper Bracket (Front) >> Installation

Disc Brake Caliper Bracket (Front): Installation

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install brake caliper bracket.
  2. Remove all traces of original adhesive patch. Clean bolt threads with denatured alcohol and allow to dry. Apply Loctite(R) to bolt threads.
  3. Install caliper bracket mounting bolts. Tighten brake caliper bracket-to-knuckle bolt to specification. See TORQUE SPECIFICATIONS .
  4. Install anti-rattle clips to brake caliper bracket.
  5. Install brake pads to brake caliper bracket. Install inner pad wear indicator.
  6. Slide brake pads in until they contact rotor.
  7. Install brake caliper.
  8. Install tire and wheel assembly.
  9. Lower vehicle.
  10. With engine OFF, gradually apply brake pedal to about 2/3 of its travel distance.
  11. Slowly release brake pedal.
  12. Wait 15 seconds, then repeat applying brakes until a firm pedal is obtained. This will properly seat brake caliper pistons and brake pads.
scientia non olet · About LEMON Manuals