LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Disc Brakes) >> Removal & Installation >> Brake Booster Accumulator >> Installation

Brake Booster Accumulator: Installation

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate all seals and metal friction points with power steering fluid.
  2. Install accumulator and O-ring seal.
  3. Place piston compressor over the end of the accumulator.
  4. Install nut on the stud.
  5. Depress accumulator with a C-clamp.
  6. Install accumulator retainer ring.
  7. Release C-clamp.
  8. Remove nut from the stud.
  9. Remove piston compressor tool.
  10. Install hydraulic booster.
  11. Install master cylinder to hydraulic brake booster.
  12. Install master cylinder nuts. Tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals