Disc Brakes Service Specifications
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKES SERVICE SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Front Brakes (1) | ||||
| Rotor Discard Thickness | 1.083 (27.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.102 (28.00) | |||
| Rotor Thickness - New | 1.142 (29.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.03) | |||
| Rear Brakes (1) | ||||
| Rotor Discard Thickness | 0.728 (18.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 0.748 (19.00) | |||
| Rotor Thickness - New | 0.787 (20.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.03) | |||
|
||||