Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift lever seal (2) onto the shift lever assembly (4).NOTE:
- Install the shift lever assembly (4) and secure it with the shift lever screw (3).
Tighten
Tighten the screw to 22 N.m (29 lb in).
IMPORTANT: The shift lever boot must be seated inside the trim covers. - Slide the shift lever boot into the trim covers.
- Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .