LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1493 (Steering Linkage (Non-Rack & Pinion)) >> Repair Instructions >> Idler Arm Replacement (AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Use the proper tool in order to separate all of the ball joints.

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the bolts (2) from the idler arm (1).
  3. Remove the prevailing torque nut (5) from the idler arm (1) ball stud.

    Discard the prevailing torque nut (5).

  4. Use the J 24319-B  in order to remove the relay rod (4) from the idler arm (5).
  5. Remove the idler arm (5).
  6. Inspect the ball stud threads for damage.
  7. Inspect the ball stud seal for cuts or other damage.
  8. Clean the threads on the ball stud and in the ball stud nut.
scientia non olet · About LEMON Manuals