LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement - Right >> Installation Procedure

Installation Procedure

  1. Install the knee bolster.
  2. Install the knee bolster to the instrument panel:
    1. Align the retainers.
    2. Press the panel into place.
  3. NOTE: Refer to FASTENER NOTICE .
  4. Install the screws that retain the bolster to the instrument panel. Tighten:  Tighten the knee bolster screws to 8 N.m (71 lb in).
  5. Install the instrument panel extension. Refer to IP Extension Replacement  .
  6. Fig 1: Removing & Installing Right Knee Bolster
    G02506282Courtesy of GENERAL MOTORS CORP.