LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Bracket Replacement - Left >> Installation Procedure

Installation Procedure

  1. Install the knee bolster brackets to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts that retain the brackets to the instrument panel carrier. Tighten:  Tighten the bolts to the brackets to the instrument panel carrier to 10 N.m (89 lb in).
  3. Install the instrument panel to the vehicle. Refer to IP Assembly Replacement  .
  4. Install the bolts that retain the brackets to the instrument panel trim pad. Tighten:  Tighten the bolts that retain the bracket to the instrument panel to 10 N.m (89 lb in).
  5. Install the driver's knee bolster. Refer to KNEE BOLSTER REPLACEMENT - LEFT  .
    Fig 1: Removing & Installing Left Knee Bolster Brackets
    G02506290Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals