Installation Procedure
- Install the instrument cluster to the instrument panel:
- Set the cluster in place in the instrument panel.
- Align the cluster with the electrical connector on the instrument panel.
- Gently press the cluster in order to seat the cluster into the instrument panel and onto the electrical connector.
- Install the four screws that retain the instrument cluster to the instrument panel. Tighten: Tighten the four screws that retain the instrument cluster tot he instrument panel 2 N.m (18 lb in).
- Install the instrument cluster trim plate. Refer to TRIM PANEL REPLACEMENT - IP CLUSTER .
NOTE:
Refer to FASTENER NOTICE
.