LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Driver Information Center Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the temperature/compass electronic display module (2).
  2. Connect the electrical connectors.
  3. Install the display lens and the switch plate (1).
  4. Install the overhead console (3). Refer to CONSOLE REPLACEMENT - OVERHEAD .
  5. Recalibrate the compass. Refer to Electronic Compass Calibration  .
    Fig 1: Removing & Installing Display Lens & Switch Plate & Temperature/Compass Electronic Display Module
    G02506304Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals