LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> General Hydraulic Brake System >> Repair Instructions >> Hydraulic Brake Booster Replacement >> Installation Procedure

Installation Procedure

  1. Install the gasket.
  2. Install the booster assembly.
  3. Install the booster mounting nuts. Tighten the nuts to 36 N.m (27 lb ft).
  4. Connect the pushrod to the brake pedal. Refer to Stop Lamp Switch Replacement .
  5. Install the master cylinder.
  6. Install the master cylinder nuts. Tighten the nuts to 36 N.m (27 lb ft).
  7. Connect the power steering hoses to the booster. Tighten the hose fittings to 27 N.m (20 lb ft).
  8. Connect the reservoir hose to the booster.
  9. Bleed the hydraulic brake booster. Refer to BLEEDING POWER STEERING SYSTEM .
  10. Release the parking brake.
scientia non olet · About LEMON Manuals